This hub motor kit with
1 Germany type motor(180ºC copper winding+ best magnet)
2 Double-wall alloy rims spoke (2.6mm spokes spoked by park tool)
3 twist throttle( with three lights shows battery capacity)
4 brake(for both side power off)
5 36V / 48V 22A controller (9 MOZ tubes in it)GERMANY QUALITY
6 1:1 PAS
7 Use manual with ties also winding pipe
Notice:front fork opening width 100mm
rear fork opening width 135mm
| Rated Power |
500W |
| Nominal Voltage |
36V |
| Controller |
36V 22A |
| Position |
Front Motor/Rear Motor |
| Construction |
Brushless Geared Motor |
| RPM |
100-380 |
| Max Torque |
32N.m |
| Efficiency |
83% |
| Hall Sensor |
With |
| Axle |
100mm(Front)/135mm(Rear) |
Front wheel installation requirements:
o No less than 100mm between front dropouts (It almost be a common standard)
Advantage of front wheel:
o Easier to install without derailleur adjustments, you can use your original freewheel.
Disadvantage of front wheel:
o Decreased grip when you ride on steep inclines or in wet condition.
Rear wheel installation requirements:
o No less than 135mm between rear dropouts (It almost be a common standard)
Advantage of rear wheel:
o Better grip especially when you ride on steep inclines or in wet condition.
o Disc brake compatible.
Disadvantage of rear wheel:
o Limited to 6/7 speed freewheel. Available freewheels are 1 speed, 5 speed, 6 speed, or 7 speed .
o More steps than installation of front wheel.
Audited Supplier 
){kind=link}
){kind=link}